Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Web Server - Ask For Help / Re: Web scheduler - where what how ?
« on: February 01, 2016, 11:25:57 PM »At least Dave Bratovich did a webinar about http://arshaw.com/fullcalendar/ .
Maybe this helps a bit....
Wolfgang
Hello,
Does anybody know if this webinar about FullCalendar by Dave has been recorded somewhere?
Best regards
Jeffrey
2
Web Server - Ask For Help / Re: Insert and overwrite mode on a form
« on: January 30, 2013, 10:15:19 PM »
That's a pity 
Best regards
Jeffrey
Best regards
Jeffrey
3
Web Server - Ask For Help / Re: Insert and overwrite mode on a form
« on: January 30, 2013, 07:12:00 AM »
Hi Bruce,
I'm also looking for a way to set "overwrite mode" on form fields.
Same issue as Kevin.
Is there already a way to do this?
My customers don't like it, when they have changed a lookup field, and they tab to the next field, that the cursor in the next field is at position 1 (insert mode).
When they don't change a lookup field, and they tab to the next field, then the next field is in "overwrite mode" and that's what they want, so that they can start typing immediately.
Hope there is some trick now to do this. ;-)
Best regards
Jeffrey
I'm also looking for a way to set "overwrite mode" on form fields.
Same issue as Kevin.
Is there already a way to do this?
My customers don't like it, when they have changed a lookup field, and they tab to the next field, that the cursor in the next field is at position 1 (insert mode).
When they don't change a lookup field, and they tab to the next field, then the next field is in "overwrite mode" and that's what they want, so that they can start typing immediately.
Hope there is some trick now to do this. ;-)
Best regards
Jeffrey
4
Web Server - Ask For Help / Re: Uploading files no longer works
« on: November 28, 2012, 09:56:19 PM »
Hi Bruce,
As of iOS6 it is possible to upload photos from your iPad/iPhone's Camera Roll.
I did a small test, please look at:
http://www.adsystems.nl/Example-Upload-photo-from-iPad-Camera-Roll-in-Safari.pdf
But that's only photos. Other files still not possible to upload directly from your iPad/iPhone.
Best regards
Jeffrey
As of iOS6 it is possible to upload photos from your iPad/iPhone's Camera Roll.
I did a small test, please look at:
http://www.adsystems.nl/Example-Upload-photo-from-iPad-Camera-Roll-in-Safari.pdf
But that's only photos. Other files still not possible to upload directly from your iPad/iPhone.
Best regards
Jeffrey
5
Web Server - Ask For Help / Re: Changing the inital selected field on a NetWebForm
« on: September 27, 2012, 06:53:14 AM »
Hi Bruce,
Those options would be very nice!
Please, please...
Best regards
Jeffrey
Those options would be very nice!
Please, please...
Best regards
Jeffrey
6
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: June 01, 2012, 05:09:35 AM »
Hi Chris,
Thanks.
The only problem is that their data must stay on the NAS.
So I can only move the NTWS exe to the local disk of the Windows 2003 Server, but that won't help if the network connection is lost with the data on the NAS.
Best regards
Jeffrey
Thanks.
The only problem is that their data must stay on the NAS.
So I can only move the NTWS exe to the local disk of the Windows 2003 Server, but that won't help if the network connection is lost with the data on the NAS.
Best regards
Jeffrey
7
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: June 01, 2012, 04:02:29 AM »
Hi Bruce,
Just got a call from my customer:
NTWS "disappeared" again, this time it's the test version I sent them, bound to 1 core.
So that's also not the solution.
I mentioned earlier that they load the NTWS exe from a Synology NAS with a drive mapping, for example:
H:\APPLICATION\app.exe
I think that the network connection between the Windows 2003 Server and the Synology NAS is sometimes (for just a second or so) broken.
And if that happens, boom, the NTWS exe is shut down (by Windows I think).
So I think it's important to install the NTWS exe as a service so that it can restart if it "disappears"...
Best regards
Jeffrey
Just got a call from my customer:
NTWS "disappeared" again, this time it's the test version I sent them, bound to 1 core.
So that's also not the solution.
I mentioned earlier that they load the NTWS exe from a Synology NAS with a drive mapping, for example:
H:\APPLICATION\app.exe
I think that the network connection between the Windows 2003 Server and the Synology NAS is sometimes (for just a second or so) broken.
And if that happens, boom, the NTWS exe is shut down (by Windows I think).
So I think it's important to install the NTWS exe as a service so that it can restart if it "disappears"...
Best regards
Jeffrey
8
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 31, 2012, 10:28:49 PM »
Hi Chris,
I have tested that messages which halt (for example "Invalid Record Declaration") ARE logged in my tps file with CS MessageBox.
But I think a GPF is another type of "beast".
Best regards
Jeffrey
I have tested that messages which halt (for example "Invalid Record Declaration") ARE logged in my tps file with CS MessageBox.
But I think a GPF is another type of "beast".
Best regards
Jeffrey
9
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 31, 2012, 11:26:28 AM »
Hi Chris,
> Are you using messagebox to take care of messages?
Yes, ALL messages are saved in a TPS file.
So when NTWS is starting, when NTWS is closing (normally), when user logs in, when user logs out.
And all other (error) messages.
> Do you have messagebox set to time out and use the default button?
All messages are completely hidden and immediately written to the log file (tps).
Yes, use the default button.
Are you compiled with debug turned on?
No.
Best regards
Jeffrey
> Are you using messagebox to take care of messages?
Yes, ALL messages are saved in a TPS file.
So when NTWS is starting, when NTWS is closing (normally), when user logs in, when user logs out.
And all other (error) messages.
> Do you have messagebox set to time out and use the default button?
All messages are completely hidden and immediately written to the log file (tps).
Yes, use the default button.
Are you compiled with debug turned on?
No.
Best regards
Jeffrey
10
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 31, 2012, 06:39:04 AM »
Thanks Bruce!
Best regards
Jeffrey
Best regards
Jeffrey
11
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 31, 2012, 04:29:50 AM »
Hi Kevin,
We get no GPF, NTWS just "disappears", also from the Task Manager.
At this moment we don't have GPF Reporter and SelfService.
We have multiple shortcuts (as I described above) to run multiple administrations (datasets) with one and the same exe.
So in Task Manager you see:
- app.exe (which starts in h:\dataA)
- app.exe (which starts in h:\dataB)
- app.exe (which starts in h:\dataC)
- etc.
So the problem/question is:
How can we tell to GPF Reporter or SelfService to restart the administration (for example CompanyA = h:\dataA) that is "disappearing"?
Best regards
Jeffrey
We get no GPF, NTWS just "disappears", also from the Task Manager.
At this moment we don't have GPF Reporter and SelfService.
We have multiple shortcuts (as I described above) to run multiple administrations (datasets) with one and the same exe.
So in Task Manager you see:
- app.exe (which starts in h:\dataA)
- app.exe (which starts in h:\dataB)
- app.exe (which starts in h:\dataC)
- etc.
So the problem/question is:
How can we tell to GPF Reporter or SelfService to restart the administration (for example CompanyA = h:\dataA) that is "disappearing"?
Best regards
Jeffrey
12
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 31, 2012, 02:55:33 AM »
Hi Bruce,
> I _think_ that it restarts the exe with all the command line parameters that it was started with.
> ie I _think_ Kevin's approach would work - although it's been a long time since I last needed to check this level of detail.
Well, in order to buy GPF Reporter, it would be very important for us to know if the exe will restart with all the command line parameters that it was started with.
So that we could use it in our situation.
Can you check this please?
Best regards
Jeffrey
> I _think_ that it restarts the exe with all the command line parameters that it was started with.
> ie I _think_ Kevin's approach would work - although it's been a long time since I last needed to check this level of detail.
Well, in order to buy GPF Reporter, it would be very important for us to know if the exe will restart with all the command line parameters that it was started with.
So that we could use it in our situation.
Can you check this please?
Best regards
Jeffrey
13
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 30, 2012, 10:10:11 PM »
Hi,
Do you know how GPF Reporter restarts the exe when it has crashed?
And when the exe has crashed, is there some way to get the data directory so that I could do a SETPATH and after that the exe will be restarted with the correct data folder?
Best regards
Jeffrey
Do you know how GPF Reporter restarts the exe when it has crashed?
And when the exe has crashed, is there some way to get the data directory so that I could do a SETPATH and after that the exe will be restarted with the correct data folder?
Best regards
Jeffrey
14
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 30, 2012, 09:18:09 AM »
Hi Bruce,
> Relying on the shortcut is considered "poor form".
Why is that?
I use multiple shortcuts to run multiple datasets with only one and the same exe, for example:
NTWS company A:
Target=h:\application\app.exe
Start in=h:\dataA
NTWS company B:
Target=h:\application\app.exe
Start in=h:\dataB
etc.
It's a pity that GPF Reporter cannot handle this.
How would you handle this with an INI file for multiple datasets?
Best regards
Jeffrey
> Relying on the shortcut is considered "poor form".
Why is that?
I use multiple shortcuts to run multiple datasets with only one and the same exe, for example:
NTWS company A:
Target=h:\application\app.exe
Start in=h:\dataA
NTWS company B:
Target=h:\application\app.exe
Start in=h:\dataB
etc.
It's a pity that GPF Reporter cannot handle this.
How would you handle this with an INI file for multiple datasets?
Best regards
Jeffrey
15
Web Server - Ask For Help / Re: NTWS sometimes exits without error! Help!
« on: May 30, 2012, 05:53:38 AM »
Hi Bruce,
Thanks, so implementing GPF Reporter would be a good choice you think?
Question about GPF Reporter:
I think you can set an option in GPF Reporter to restart the exe when a gpf occurs, right?
If yes, is it possible to set the Startup folder in GPF Reporter?
In our case the exe is for example in the folder H:\APPLICATION\app.exe but the data is in the folder H:\DATA, so GPF Reporter needs to know where to find the data when it restarts the exe.
EDIT: My client just called me and saw this error of my NTWS application on the server, see jpg attachment: InPageError?
BUT my application (bound to 1 processor) is still running ok; so it looks like it's a message of a previous crash that now is shown on the screen (after he rebooted the server).
Best regards
Jeffrey
[attachment deleted by admin]
Thanks, so implementing GPF Reporter would be a good choice you think?
Question about GPF Reporter:
I think you can set an option in GPF Reporter to restart the exe when a gpf occurs, right?
If yes, is it possible to set the Startup folder in GPF Reporter?
In our case the exe is for example in the folder H:\APPLICATION\app.exe but the data is in the folder H:\DATA, so GPF Reporter needs to know where to find the data when it restarts the exe.
EDIT: My client just called me and saw this error of my NTWS application on the server, see jpg attachment: InPageError?
BUT my application (bound to 1 processor) is still running ok; so it looks like it's a message of a previous crash that now is shown on the screen (after he rebooted the server).
Best regards
Jeffrey
[attachment deleted by admin]