Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
E-Mail - Ask For Help / Gmail send issue after upgrading to Nettalk 14
« on: September 25, 2023, 07:38:16 PM »
Good Day everyone,
I upgraded to NT 14 from 11 and now I have an issue where my application cannot send emails using gmail (google).
I tested using the Nettalk demo, and all that I get is ... nothing. Not a single response from the gmail server looking at the log tab in the demo app.
Settings used was smtp.gmail.com, I tried port 465 and 587 and various number of options enabled and disabled.
I can connect to and send emails using other email servers, but for some reason gmail returns not a single response.
I gone back to the last version of my application which was compiled with NT11 and that works sending an email using gmail. But using the new version of my app with NT14, there is no joy. (nothing changed except that it was compiled with NT14).
Is there maybe something I am not aware of that changed since NT11?
I upgraded to NT 14 from 11 and now I have an issue where my application cannot send emails using gmail (google).
I tested using the Nettalk demo, and all that I get is ... nothing. Not a single response from the gmail server looking at the log tab in the demo app.
Settings used was smtp.gmail.com, I tried port 465 and 587 and various number of options enabled and disabled.
I can connect to and send emails using other email servers, but for some reason gmail returns not a single response.
I gone back to the last version of my application which was compiled with NT11 and that works sending an email using gmail. But using the new version of my app with NT14, there is no joy. (nothing changed except that it was compiled with NT14).
Is there maybe something I am not aware of that changed since NT11?
2
Web Server - Ask For Help / Re: HotDates - How do I add Vertical Lines
« on: April 15, 2022, 06:08:46 AM »
Hi Bruce,
Thank you for the response, but maybe I was not clear.
Problem is that the div is one large div spanning all the columns (days) for the data. I can easily add the border if there was a div for each column.
I checked the supplied demo hotdates app with nettalk too. See the attached screenshot indicating that the row is just one div for the row.
Thank you for the response, but maybe I was not clear.
Problem is that the div is one large div spanning all the columns (days) for the data. I can easily add the border if there was a div for each column.
I checked the supplied demo hotdates app with nettalk too. See the attached screenshot indicating that the row is just one div for the row.
3
Web Server - Ask For Help / HotDates - How do I add Vertical Lines
« on: April 14, 2022, 11:43:04 PM »
Hi,
I have a hot dates calendar and is struggling to add vertical lines for each day.
I have added CSS to add the horizontal lines, I know how css works. I just cannot find where to add the CSS to apply the border or lines as needed.
Searched everywhere in the template, it looks like there are only options(css fields) for the "month" calendars and non for the "planners".
I have attached the screenshot to show what I want to do and the css linked to the row. I have css to add the lines, I want to add it where I underlined the current class added to the row.
Can someone direct me to where I can add my custom CSS to the existing row class element?
I have a hot dates calendar and is struggling to add vertical lines for each day.
I have added CSS to add the horizontal lines, I know how css works. I just cannot find where to add the CSS to apply the border or lines as needed.
Searched everywhere in the template, it looks like there are only options(css fields) for the "month" calendars and non for the "planners".
I have attached the screenshot to show what I want to do and the css linked to the row. I have css to add the lines, I want to add it where I underlined the current class added to the row.
Can someone direct me to where I can add my custom CSS to the existing row class element?
4
Web Server - Ask For Help / Re: All my popup forms are placed to the left
« on: December 02, 2018, 12:34:38 AM »
Hi,
Mine is doing the same, have you managed to fix this?
Mine is doing the same, have you managed to fix this?
5
Web Server - Ask For Help / Re: Login not working after 10.36
« on: November 05, 2018, 02:19:17 AM »
Hi Guys,
Thank you for the tips ... been trying everything with no joy and all of the sudden the login worked again ... I don't know what I did, but I suspect it had to be with the "hash" I make "hidden" using the "Hide Condition".
I have another app that gave me the same issue, will let you know should I get that one fixed.
Thank You
Thank you for the tips ... been trying everything with no joy and all of the sudden the login worked again ... I don't know what I did, but I suspect it had to be with the "hash" I make "hidden" using the "Hide Condition".
I have another app that gave me the same issue, will let you know should I get that one fixed.
Thank You
6
Web Server - Ask For Help / Login not working after 10.36
« on: November 03, 2018, 10:47:51 PM »
Here I go again ...
After loading Nettalk 10.36 there are 2 of my apps where the login page is broken, the others do work.
The issue: On the login page, I enter login credentials then when I click the "login" button the login page just reloads. Nothing was changed on my login pages, they just stopped working after installing Nettalk 10.36.
I tried:
- Checked and unchecked the "delete session" option in template.
- Deleted the "State" file.
- Put the app in a whole new folder on server (clean install).
- Compared working vs not working login page and source.
Any other suggestions?
After loading Nettalk 10.36 there are 2 of my apps where the login page is broken, the others do work.
The issue: On the login page, I enter login credentials then when I click the "login" button the login page just reloads. Nothing was changed on my login pages, they just stopped working after installing Nettalk 10.36.
I tried:
- Checked and unchecked the "delete session" option in template.
- Deleted the "State" file.
- Put the app in a whole new folder on server (clean install).
- Compared working vs not working login page and source.
Any other suggestions?
7
Web Server - Ask For Help / Re: Web Server stop responding by other Procedure
« on: May 17, 2018, 06:58:44 AM »
Hi Bruce,
I will look into it.
Even if I remove the excel reports I will still sit with the same issue with my PDF reports.
A bit more background:
I use the SV PDF template and the report procedure creates a PDF and the procedure then returns the filename which I then "serve" to the user. This procedure which created the report also "breaks" my app when another user try to browse something.
The reason why the report procedure works like that is because I have an option where the user can "schedule" a report. The scheduled report is the same report the user can generate when using the browser. I have a process which then generate the scheduled report by calling the same report procedure.
Should you have any ideas please get back to me.
Thank You
I will look into it.
Even if I remove the excel reports I will still sit with the same issue with my PDF reports.
A bit more background:
I use the SV PDF template and the report procedure creates a PDF and the procedure then returns the filename which I then "serve" to the user. This procedure which created the report also "breaks" my app when another user try to browse something.
The reason why the report procedure works like that is because I have an option where the user can "schedule" a report. The scheduled report is the same report the user can generate when using the browser. I have a process which then generate the scheduled report by calling the same report procedure.
Should you have any ideas please get back to me.
Thank You
8
Web Server - Ask For Help / Re: Web Server stop responding by other Procedure
« on: May 11, 2018, 02:05:42 AM »
Hi Bruce,
>>So I presume this is not running on the "main" webserver thread? It is running on some other thread?
Not on the "main" webserver thread. When a user specified all the filters and then accept the form the procedure is called to create the excel file. Just a note, I do the same with some PDF reports. Some PDF reports is called in source and creates the same issue where they will "lock up" the web service. I just used the "excel report" as an example.
>>Also, are you actually "using office" to create the Excel file? ie using something like say Office Inside?
I use EasyExcel. I have Office Inside and will use it if it will fix my issue.
>> Excel itself should likely only be accessed by one "process" in your app at a time. So you'd need to make that blocking so that only one "user" can access Excel at a time.
Until now I did not have such an issue. (I have several web servers running on one server all creating excel reports).
Any suggestions or ideas I will gladly implement to get around this issue I am experiencing.
Thank You
>>So I presume this is not running on the "main" webserver thread? It is running on some other thread?
Not on the "main" webserver thread. When a user specified all the filters and then accept the form the procedure is called to create the excel file. Just a note, I do the same with some PDF reports. Some PDF reports is called in source and creates the same issue where they will "lock up" the web service. I just used the "excel report" as an example.
>>Also, are you actually "using office" to create the Excel file? ie using something like say Office Inside?
I use EasyExcel. I have Office Inside and will use it if it will fix my issue.
>> Excel itself should likely only be accessed by one "process" in your app at a time. So you'd need to make that blocking so that only one "user" can access Excel at a time.
Until now I did not have such an issue. (I have several web servers running on one server all creating excel reports).
Any suggestions or ideas I will gladly implement to get around this issue I am experiencing.
Thank You
9
Web Server - Ask For Help / Re: Web Server stop responding by other Procedure
« on: May 10, 2018, 08:55:02 PM »
Ok, so after the change things was better. But still same issue occured just not too often. Then finally found the issue, just do not know how to handle this.
I have some reports which is a procedure to create a excel file/report with the data requested by the user, sometimes this takes a few seconds and during that process if someone tries to do something the site will "lock up".
I could thread the excel process, but doing that will then send the link to the report before the excel process completes. How will I "wait" for the excel process and not "lock up" the webapp when other users use the site?
I have some reports which is a procedure to create a excel file/report with the data requested by the user, sometimes this takes a few seconds and during that process if someone tries to do something the site will "lock up".
I could thread the excel process, but doing that will then send the link to the report before the excel process completes. How will I "wait" for the excel process and not "lock up" the webapp when other users use the site?
10
Web Server - Ask For Help / Re: Web Server stop responding by other Procedure
« on: April 09, 2018, 08:06:30 AM »
Hi Bill,
Thank You ... driving home I was thinking about this and actually realized that I have not made the procedure running on a separate thread. Will do the change and test.
Will post the outcome after a few days of testing.
Regards
Thank You ... driving home I was thinking about this and actually realized that I have not made the procedure running on a separate thread. Will do the change and test.
Will post the outcome after a few days of testing.
Regards
11
Web Server - Ask For Help / Web Server stop responding by other Procedure
« on: April 09, 2018, 05:02:18 AM »
Hi,
Maybe someone can tell me what I am doing wrong.
I have a webapp and reports can be scheduled. To make easy I create a small procedure on the main window (WebServer procedure) to run every 5min to check if there are any reports scheduled to run. The procedure then runs the reports and add them to the email queue.
This works great but as soon as I am logged in and there is a report currently being generated and I view/refresh the table being used in the report, the "web interface" side stops working. The app does not give an error and is stil responding to any mouse clicks on the server side, just the "web interface" side stopped working. The report is generated successfully after a few seconds because some reports take a few seconds to calculate and generate.
Seems like when the procedure is currently reading/updating a table and I want to "browse" the same table the system "bombs" out somewhere. By closing and opening the app again on the server it works as normal.
What might be my problem? I am using TPS files.
Thank you
Maybe someone can tell me what I am doing wrong.
I have a webapp and reports can be scheduled. To make easy I create a small procedure on the main window (WebServer procedure) to run every 5min to check if there are any reports scheduled to run. The procedure then runs the reports and add them to the email queue.
This works great but as soon as I am logged in and there is a report currently being generated and I view/refresh the table being used in the report, the "web interface" side stops working. The app does not give an error and is stil responding to any mouse clicks on the server side, just the "web interface" side stopped working. The report is generated successfully after a few seconds because some reports take a few seconds to calculate and generate.
Seems like when the procedure is currently reading/updating a table and I want to "browse" the same table the system "bombs" out somewhere. By closing and opening the app again on the server it works as normal.
What might be my problem? I am using TPS files.
Thank you
12
Web Server - Ask For Help / Re: Text field only shows first character
« on: March 01, 2018, 03:04:59 AM »
Hi Bruce,
See attached:
...state.xml_Bug - the file I deleted to see all chars.
...state.xml_Working - file currently working - well, just delete the current state file to create a new working file.
With app and dct.
Thank You
See attached:
...state.xml_Bug - the file I deleted to see all chars.
...state.xml_Working - file currently working - well, just delete the current state file to create a new working file.
With app and dct.
Thank You
13
Web Server - Ask For Help / Re: Text field only shows first character
« on: February 27, 2018, 09:46:29 AM »
That is a good idea, like I said earlier I did get the same issue previously just could not remember what I did to fix it.
Just a note to Bruce for when he starts digging into this bug ... I created a very small (2 tables) app from scratch using the wizard this morning and the bug was there from the start.
Nettalk 10.15
Clarion 10 12799
Just a note to Bruce for when he starts digging into this bug ... I created a very small (2 tables) app from scratch using the wizard this morning and the bug was there from the start.
Nettalk 10.15
Clarion 10 12799
14
Web Server - Ask For Help / Re: Text field only shows first character
« on: February 27, 2018, 09:10:09 AM »
Thank you Peter, it's once again displaying all the data!
15
Web Server - Ask For Help / Text field only shows first character
« on: February 27, 2018, 04:39:40 AM »
Hi,
Can someone please assist with the following. I have a wizard generated update and a text field is displaying only the first character saved on the record. I tried by re-creating another update window. I deleted the field and manually created another. I also changed the text field to a string. All just gave me the first char of what is currently saved in the field.
I did get this once a while back ... cannot remember what I did to get this fixed.
Thanks
Can someone please assist with the following. I have a wizard generated update and a text field is displaying only the first character saved on the record. I tried by re-creating another update window. I deleted the field and manually created another. I also changed the text field to a string. All just gave me the first char of what is currently saved in the field.
I did get this once a while back ... cannot remember what I did to get this fixed.
Thanks