NetTalk Central

NetTalk Web Server => Web Server - Ask For Help => Topic started by: Skip Williams on March 22, 2011, 12:47:37 PM

Title: Nettalk just quits working
Post by: Skip Williams on March 22, 2011, 12:47:37 PM

I have a nettalk app that I recently converted from nt4 c6.3 to c7.3 nt5.17.  Its been running for a number of years with no major changes except for the conversion and the addition of a couple of more inquiry only screens.

Since the conversion, the app seems to just stop responding after a couple of hours or so.  They have to bring it down and back up, then it is ok for a while. Its mainly an inquiry app and not heavily used but they are not too happy about having to keep restarting it. 

Any ideas where I might look for the problem?

Thanks

Skip

Title: Re: Nettalk just quits working
Post by: Bruce on March 22, 2011, 10:55:24 PM

Hi Skip,

Very hard to say without a lot more information.

Probably the only potential for complication is if you have multiple nettalk objects in the WebServer procedure.

Other than that the behaviour you describe is not "normal" so more data would be required.

cheers
Bruce

Title: Re: Nettalk just quits working
Post by: charl99 on March 23, 2011, 02:35:28 AM

Hi Skip,

Wow, that's a massive jump.

I rewrote my NT4 app, not funny, but I think it is better now.  If not too much work, consider it.

Regards
Charl

Title: Re: Nettalk just quits working
Post by: Bruce on March 23, 2011, 04:04:23 AM

A rewrite is unnecessary.
Of course you may have learned stuff along the way, so it may be "better the second time around" - but generally speaking a rewrite is not required at all.

cheers
Bruce